Wet Dhoop making machine

Beware from Duplication and Cheater.

Nobody our Ex-partner

Machine design copyright by Sohamtex Engineers 

• Machine Speed 250 - 350 nos/minute (depends on size & Material).
• Electric control panel with variable speed.
• Production 300-400 kg. /8 Hr. (Depends on size & Material)
• Required power 3.5 HP, 3 Phase.

Require Compressor For Dry Dhoop1 HP & Wet Dhoop 2 HP (By Client's Scope)

• Length of Stick you can change cutting blade for different size.
• Mould size 32 cavities as per size of sample (1 attached in machine)

Hydraulic operating system with 40 tone capacity

Hydraulic Oil Required 30 liter (Client's scope).

Auto Cutter System available

• Oil tank 35 liters capacity
• Conveyor system in built.

Machine Size 9 * 3 * 3.5 FEET

Machine weight 350 Kg.

• Free Material mixing formula, contacts of raw material supplier,
  Training of machine operating and general maintenance.
• Warranty 9 months on main motor and drive.
• This machine designed by our Engineer.
• This machine is produced by our technical staff.
• (Not import from another country.)
• Lifetime Telephonic Technical support Free after sales.
• Lifetime payable service available
• Easy to operating & Low Maintenance.
• Made In India.

Auto Drive Dhoop Stick Making Machine

Beware from Duplication and Cheater.
Nobody our Ex-Partner

Machine design Copyright By Sohamtex Engineers 

• Machine Speed: 250 - 350 Nos/Minute (Depends On size & Material).
• Electric Control Panel With Variable speed.
• Production: 300-400 kg. /8 Hr. (Depends on size & Material)
• Required power: 3.5 HP, 3 Phase.

• Require Compressor: For Dry Dhoop1 HP & Wet Dhoop 2 HP (By Client’s Scope)

• Length of Stick: you Can Change Cutting Blade For different size.
• Mould size: 32 Cavities As Per size of sample (1 attached in machine)

• Hydraulic operating System with 40 tone capacity

• Hydraulic Oil : Required 30 Liter (Client’s scope).

· Auto Cutter System available

• Oil tank: 35 Liters Capacity
• Conveyor system in built.

• Machine Size: 9 * 3 * 3.5 FEET

•  Machine weight: 350 Kg.

• Free: Material Mixing Formula, Contacts of Raw Material supplier,
  Training of machine Operating And General maintenance.
• Warranty: 9 months on main motor and drive.
• This machine designed by our Engineer.
• This machine is produced by our technical staff.
• (Not import from another country.)
• Lifetime telephonic Technical Support Free After sales.
• Lifetime Payable service Available
• Easy to Operating & Low Maintenance.
• Made in India.

Auto Manual Dhoop Stick Making Machine 

Beware from Duplication and Cheater.

Nobody our Ex-partner

Machine design copyright By sohamtex Engineers

 Machine Speed: 250 - 350 Nos/Minute (depends on size & Material).

• Electric control panel With variable speed.
• Production: 300-400 kg. /8 Hr. (Depends on size & Material)
• Required power: 3.5 HP, 3 Phase.

•   Require Compressor: For Dry Dhoop1 HP & Wet Dhoop 2 HP (By Client’s Scope)

• Length of Stick: you can change cutting blade for different size.
• Mould size: 32 cavities as per size of sample (1 attached in machine)

•  Hydraulic operating system with 40 tone capacity
•  Hydraulic Oil : Required 30 liter (Client’s scope).
•  Auto Cutter System available

• Oil tank: 35 Liters capacity
• Conveyor system in built.

•  Machine weight: 350 Kg.

• Free: Material mixing formula, contacts of raw material supplier
• Training of machine operating and general maintenance.
• Warranty: 9 months on main motor and drive.
• This machine designed by our Engineer.
• This machine is produced by our technical staff.
• (Not import from another country.)
• Lifetime telephonic technical support free after sales.
• Lifetime payable service available 
• Easy to operating & low maintenance.
• Made in India.

Natural Dhoop Stick Making Machine (Auto Cutter)

Beware From Duplication and Cheater.

Nobody Our Ex-Partner

Machine design Copyright by sohamtex Engineers 

• Machine Speed 250 - 350 nos/minute (depends on size & Material).
• Electric control panel with variable speed.
• Production 300-400 kg. /8 Hr. (Depends on size & Material)
• Required power 3.5 HP, 3 Phase.

Require Compressor For Dry Dhoop1 HP & Wet Dhoop 2 HP (By Client's Scope)

• Length of Stick you can change cutting blade for different size.
• Mould size 32 Cavities as per size of sample (1 attached in machine)

Hydraulic operating system with 40 tone capacity

Hydraulic Oil Required 30 liter (Client's scope).

Auto Cutter System available

• Oil tank 35 liters capacity
• Conveyor system in built.

Machine Size 9 * 3 * 3.5 FEET

Machine weight 350 Kg.

• Free Material mixing formula, contacts of raw material supplier,
  Training of machine operating and general maintenance.
• Warranty 9 months on main motor and drive.
• This machine designed by our Engineer.
• This machine is produced by our technical staff.
• (Not import from another country.)
• Lifetime telephonic technical support free after sales.
• Lifetime payable service available
• Easy to operating & low maintenance.
• Made in India.

Wet Dhoop Stick Making Machine. (Auto Cutter)

•  Machine Speed: 200 Nos/Minute Depends on size.
•  Electric control panel with Variable Speed.
•  Production:200 kg. /12 Hr. (Depends on size)
•  Required power: 2.5 HP, 3 Phase.
•  Length of Stick: you Can Change Cutting Blade for Different size.
•  Mould size: 10 or 15 cavities. (1 attached in machine)
•  Hydraulic operating system with 50 tone capacity
•  Hydraulic Oil : Required 50 liter (Client’s scope).
•  Oil tank: 50 Liters Capacity
•  Conveyor System in built.
•  Machine Size: 3100 × 600 × 1200 mm (10.1 × 2 × 4 Feet)
•  Machine weight: 300 Kg.
•  Free: Material Mixing Formula, contacts of raw material supplier,Training of machine operating and general maintenance.
•  Warranty: 9 months only on Main motor and Drive.
•  This machine designed by our Engineer.
•  This machine is produced by our technical staff.
•  (Not import from another country.)
•  Lifetime telephonic technical support free after sales.
•  Lifetime payable service Available
•  Easy to operating & Low maintenance.

 Made in India.

Wet Dhoop Stick Making Machine. 

• Machine Speed: 200 nos/minute depends on size.
• Electric control panel with variable speed.
• Production:200 kg. /12 Hr. (Depends on size)
• Required power: 2.5 HP, 3 Phase.
• Length of Stick: you can change cutting blade for different size.
• Mould size: 10 or 15 cavities. (1 attached in machine)
• Hydraulic operating system with 50 tone capacity
• Hydraulic Oil : Required 50 liter (Client’s scope).
• Oil tank: 50 liters capacity
• Conveyor system in built.
• Machine Size: 3100 × 600 × 1200 mm (10.1 × 2 × 4 Feet)
• Machine weight: 300 Kg.
• Free: Material mixing formula, contacts of raw material supplier,Training of machine operating and general maintenance.
•  Warranty: 9 months only on main motor and drive.
• This machine designed by our Engineer.
• This machine is produced by our technical staff.
• (Not import from another country.)
• Lifetime telephonic technical support free after sales.
• Lifetime payable service available 
• Easy to operating & low maintenance.

Made in India.

Beware from duplication and cheater.

Nobody our Ex-partner

Machine design copyright by sohamtex engineers

•  Machine Speed: 250 - 350 nos/minute (depends on size & Material).
• Electric control panel with variable speed.
• Production: 300-400 kg. /8 Hr. (Depends on size & Material)
• Required power: 3.5 HP, 3 Phase.
•  Require Compressor: For Dry Dhoop1 HP & Wet Dhoop 2 HP (By Client’s Scope)
• Length of Stick: you can change cutting blade for different size.
• Mould size: 32 cavities as per size of sample (1 attached in machine)
• Hydraulic operating system with 40 tone capacity
•  Hydraulic Oil : Required 30 liter (Client’s scope).
•  Auto Cutter System available
• Oil tank: 35 liters capacity
• Conveyor system in built.
• Machine Size: 9 * 3 * 3.5 FEET
• Machine weight: 350 Kg.
  
• Free: Material mixing formula, contacts of raw material supplier,
• Training of machine operating and general maintenance.
• Warranty: 9 months on main motor and drive.
• This machine designed by our Engineer.
• This machine is produced by our technical staff.
• (Not import from another country.)
• Lifetime telephonic technical support free after sales.
• Lifetime payable service available 
• Easy to operating & low maintenance.
• Made in India.

Beware from Duplication And Cheater.

Nobody our Ex-Partner

Machine design copyright By sohamtex Engineers

• Machine Speed 250 - 350 nos/minute (depends on size & Material).

• Electric control panel with variable speed.
• Production 300-400 kg. /8 Hr. (Depends on size & Material)
• Required power 3.5 HP, 3 Phase.

• Require Compressor For Dry Dhoop1 HP & Wet Dhoop 2 HP (By Client's Scope)

• Length of Stick you can change cutting blade for different size.
• Mould size 32 cavities as per size of sample (1 attached in machine)

Hydraulic operating System with 40 tone capacity

Hydraulic Oil Required 30 liter (Client's scope).

Auto Cutter System Available

• Oil tank 35 liters Capacity
• Conveyor System in built.

Machine Size 9 * 3 * 3.5 FEET

Machine weight 350 Kg.

• Free Material Mixing Formula, Contacts of Raw Material Supplier,
  Training of Machine operating And General Maintenance.
• Warranty 9 months on main motor and drive.
• This machine designed by our Engineer.
• This machine is produced by our technical staff.
• (Not import from another country.)
• Lifetime telephonic technical support free after sales.
• Lifetime payable service available
• Easy to operating & low maintenance.
• Made in India.

Auto Cutting Dhoop Stick Making Machine

Beware from duplication and cheater.

Nobody our Ex-partner

Machine design copyright by sohamtex engineers

• Machine Speed 250 - 350 nos/minute (depends on size & Material).
• Electric control panel with variable speed.
• Production 300-400 kg. /8 Hr. (Depends on size & Material)
• Required power 3.5 HP, 3 Phase.

Require Compressor For Dry Dhoop1 HP & Wet Dhoop 2 HP (By Client's Scope)

• Length of Stick you can change cutting blade for different size.
• Mould size 32 cavities as per size of sample (1 attached in machine)

Hydraulic operating system with 40 tone capacity

Hydraulic Oil Required 30 liter (Client's scope).

Auto Cutter System available

• Oil tank 35 liters capacity
• Conveyor system in built.

Machine Size 9 * 3 * 3.5 FEET

Machine weight 350 Kg.

• Free Material mixing formula, contacts of raw material supplier,
  Training of machine operating and general maintenance.
• Warranty 9 months on main motor and drive.
• This machine designed by our Engineer.
• This machine is produced by our technical staff.
• (Not import from another country.)
• Lifetime telephonic technical support free after sales.
• Lifetime payable service available
• Easy to operating & low maintenance.
• Made in India.

Manual Cutting Dhoop Stick Making Machine

Beware from duplication and cheater.

Nobody our Ex-partner

Machine design copyright By Sohamtex engineers 

• Machine Speed 250 - 350 nos/minute (depends on size & Material).
• Electric control panel with variable speed.
• Production 300-400 kg. /8 Hr. (Depends on size & Material)
• Required power 3.5 HP, 3 Phase.

Require Compressor For Dry Dhoop1 HP & Wet Dhoop 2 HP (By Client's Scope)

• Length of Stick you can change cutting blade for different size.
• Mould size 32 cavities as per size of sample (1 attached in machine)

Hydraulic operating system with 40 tone capacity

Hydraulic Oil Required 30 liter (Client's scope).

Auto Cutter System available

• Oil tank 35 liters capacity
• Conveyor system in built.

Machine Size 9 * 3 * 3.5 FEET

Machine weight 350 Kg.

• Free Material mixing formula, contacts of raw material supplier,
  Training of machine operating and general maintenance.
• Warranty 9 months on main motor and drive.
• This machine designed by our Engineer.
• This machine is produced by our technical staff.
• (Not import from another country.)
• Lifetime telephonic technical support free after sales.
• Lifetime payable service available
• Easy to operating & low maintenance.
• Made in India.

• Electric control panel Operating.
• Required power: 3 HP, 3 Phase.
• Material Filling capacity: 5 to 5.5 Kg.
• Manual Cutting Length of Stick: 2 Inch to 8 Inch.
• Number of Cavity for 5/2 Die: 50 cavities (Lines)
• Hydraulic operating system with 25 tone capacity Hydraulic
• Oil : Required 30 Liter (Client’s scope).
• Oil tank: 35 Liters Capacity
• Machine Size: 5.5 * 2.5 * 3.5 FEET
• Machine weight: 350 Kg.
• Free: contacts of Raw Material Supplier, Training of machine Operating And General Maintenance.
• Warranty: 9 months on main Motor and Drive.
• Lifetime telephonic technical support free After Sales.
• (9 AM to 6 PM, Thursday weekly off)
• Lifetime payable service available Easy To Operating & low maintenance.

•  Machine Speed: 325 – 425 Kg./ 8 HR (depends on size & Material).
•  Electric control panel Operating.
•  Required power: 3 HP, 3 Phase.Material Filling capacity: 5 to 5.5 Kg. Manual Cutting
•  Length of Stick: 2 Inch to 8 Inch.Number of Cavity for 5/2 Die: 50 cavities (Lines) Hydraulic Operating System with 25 tone capacity
•  Hydraulic Oil : Required 30 Liter (Client’s scope). Oil tank: 35 liters capacity Machine Size: 5.5 * 2.5 * 3.5 FEET
•  Machine weight: 350 Kg.
•  Free: contacts of raw Material Supplier, Training of machine operating and General Maintenance.
•  Warranty: 9 months on Main Motor and Drive.
•  Lifetime telephonic technical support free after sales. (9 AM to 6 PM, Thursday weekly off)
•  Lifetime Payable Service available
•  Easy to operating & low maintenance.

Wet Dhoop Stick Making Machine. (Auto Cutter)

·        Machine Speed: 200 nos/minute depends on size.

·        Electric control panel with variable speed.

·        Production:200 kg. /12 Hr. (Depends on size)

·        Required power: 2.5 HP, 3 Phase.

·        Length of Stick: you can change cutting blade for different size.

·        Mould size: 10 or 15 cavities. (1 attached in machine)

·        Hydraulic operating system with 50 tone capacity

·        Hydraulic Oil : Required 50 liter (Client’s scope).

·        Oil tank: 50 liters capacity

·        Conveyor system in built.

·        Machine Size: 3100 × 600 × 1200 mm (10.1 × 2 × 4 Feet)

·        Machine weight: 300 Kg.

·        Free: Material mixing formula, contacts of raw material supplier,
           Training of machine operating and general maintenance.

·        Warranty: 9 months only on main motor and drive.

·        This machine designed by our Engineer.

·        This machine is produced by our technical staff.

·        (Not import from another country.)

·        Lifetime telephonic technical support free after sales.

·        Lifetime payable service available 

·        Easy to operating & low maintenance.

·        Made in India.

Dhup Stick Making Machine

??

Beware from Duplication and Cheater.

Nobody our Ex-Partner

Machine design copyright by sohamtex engineers??

??

• Machine Speed: 250 - 350 nos/minute (depends on size & Material).
• Electric control panel with variable speed.
• Production: 300-400 kg. /8 Hr. (Depends on size & Material)
• Required power: 3.5 HP, 3 Phase.

?????????????? Require Compressor: For Dry Dhoop1 HP & Wet Dhoop 2 HP (By Client's Scope)

• Length of Stick: you can change cutting blade for different size.
• Mould size: 32 cavities as per size of sample (1 attached in machine)

?????????????? Hydraulic operating system with 40 tone capacity

?????????????? Hydraulic Oil : Required 30 liter (Client's scope).

?????????????? Auto Cutter System available

• Oil tank: 35 liters capacity
• Conveyor system in built.

?????????????? Machine Size: 9 * 3 * 3.5 FEET

?????????????? Machine weight: 350 Kg.

• Free: Material mixing formula, contacts of raw material supplier,
  ???????????????????? Training of machine operating and general maintenance.
• Warranty: 9 months on main motor and drive.
• This machine designed by our Engineer.
• This machine is produced by our technical staff.
• (Not import from another country.)
• Lifetime telephonic technical support free after sales.
• Lifetime payable service available??
• Easy to operating & low maintenance.